Recent Posts

Pages: 1 ... 8 9 [10]
91
Dobs, how hot do you heat your plastic? I heat mine up to 350 degrees and ALWAYS have trouble with a duel injector and the blending block. It is very common to get no good baits! The way I do it now is to hand pour the top, close the mold and inject the bottom. I would like to be able to do it the way he does in the films.
350 on an inital the i shoot in the 330-340 roughly
92
Photo Gallery / Re: Green gizzard fluke
« Last post by bassinfool on 09/17/18 15:53 UTC »
Love that color. How much green hi lite did you use

Not really sure. Just kept adding it until I got it like I wanted it. Maybe a little less than 1/8 teaspoon in 1 cup.
93
Welcome to the Do-It boards Striperman.

The Do-It Ultra Minnow Blade uses a similar blade blade blank, but the cast on lead portion resembles the Shad Blade bait, also from Do-It. If you take a look at the on-line store and check those two baits you'll see what I refer to. I'll get a picture and a measurement of the blade blank used that is much like that of the Ledgehog baits in your link.

The overall length of this insert is 3.25". I know the overall length of the finished Ultra Minnow Blade bait is close to 4". Hope this helps.
94
I agree, he has a super channel and I like his baits. I just want to be able to shoot them like he does. Higher heat, different type of plastic, added stabilizer before warming? Got a lot of things to try.
95
Photo Gallery / Re: Trouble logging in
« Last post by ctom on 09/17/18 15:32 UTC »
I just spent 20 minutes on the phone and computer simultaneously with John, the tech fella. Same issue as with Lines...log in issues. I must have pi$$ed of the log in gods big time because I couldn't get anything to work but John worked his magic and it seems to be good to go now.

A big Thank You to John and to Ryan for helping out.
96
Photo Gallery / Re: Green gizzard fluke
« Last post by basscatlildave on 09/17/18 15:16 UTC »
Great color
97
I really like his channel too. I have asked a few things in the comments and he has always answered me back.
98
I get my plastic to around 370 and shoot. I do not heat any equipment without issues. 
99
Dobs, how hot do you heat your plastic? I heat mine up to 350 degrees and ALWAYS have trouble with a duel injector and the blending block. It is very common to get no good baits! The way I do it now is to hand pour the top, close the mold and inject the bottom. I would like to be able to do it the way he does in the films.
100
http://ledgehog.com/index.php?cPath=53#top


I have found some of the blade baits listed but they do not show me the length of the inserts for the blade bait
Pages: 1 ... 8 9 [10]