Author Topic: Cut face spinner  (Read 332 times)

Offline jliddle

  • Minnow
  • *
  • Posts: 2
Cut face spinner
« on: 05/07/18 07:17 UTC »
Making Cutface spinners for the first time, anyone have experience with these baits. A question I have is , how to create the wire extension (which comes through the top of the lure) so the fishing line can be tied to it. The Standard lure comes with a closed loop on the head of the lure. Any advice will be appreciated.

Jim

Online WALLEYE WACKER

  • Lunker
  • *****
  • Posts: 2740
Re: Cut face spinner
« Reply #1 on: 05/07/18 09:39 UTC »
Jim I’m not sure what it is your trying to do. The closed loop is the tying point. Or is a problem that the knot moves on the closed loop for you. Welcome to the forum !!
« Last Edit: 05/07/18 09:42 UTC by WALLEYE WACKER »

Offline Bucho

  • Minnow
  • *
  • Posts: 20
Re: Cut face spinner
« Reply #2 on: 05/07/18 15:36 UTC »
You will have to form your own wires. Marc epxlains it around min.8

https://www.youtube.com/watch?time_continue=369&v=RJEQtPa5eRw

Online WALLEYE WACKER

  • Lunker
  • *****
  • Posts: 2740
Re: Cut face spinner
« Reply #3 on: 05/08/18 09:06 UTC »
Bucho thanks for the link.After watching the video that Marc did I see what it is your looking too do. You’ll have to make your own wire frame or I don’t know if the pre made wire has enough to straighten it out and make a loop after you pour it.

Offline jliddle

  • Minnow
  • *
  • Posts: 2
Re: Cut face spinner
« Reply #4 on: 05/08/18 15:46 UTC »
Thank you for the advice and video link, will keep you posted on how they turn out.