Author Topic: Wire tying skirts  (Read 589 times)

Offline Bsudd

  • Yearling
  • **
  • Posts: 29
Wire tying skirts
« on: 03/22/17 01:25 UTC »
Is it a good thing that when I wire tie my skirts on my Jigs the top around the head flares out? I mean I think its unique instead of all the skirt hanging down the hook. I don't trim the flare short, it just flares out and kinda hangs over the middle section, giving it a bit of a finesse type look if that makes since.
« Last Edit: 03/22/17 01:47 UTC by Bsudd »

Online Lines

  • Lunker
  • *****
  • Posts: 643
Re: Wire tying skirts
« Reply #1 on: 03/22/17 06:00 UTC »
I've never tied my own jigs, but I think the flare makes it look more professional. It also would give it more underwater action I believe.

Offline bassinfool

  • Kicker
  • ****
  • Posts: 418
Re: Wire tying skirts
« Reply #2 on: 04/15/17 18:13 UTC »
Yeah that is normal.  Generally, wire tying causes the skirt to be held up against the shaft of the hook much tighter than a rubber collar which has more give to it which is why you see the fanning of the skirt material.  I like to use more material above the wire tie towards the eye of the hook so that when I tie the skirt and lay it back as it would be fished I have a skirt that is even/almost even with the skirt at the bend of the hook behind the tie if that makes sense.