Author Topic: Umbrella rig question?  (Read 1987 times)

Offline Cannibul

  • Kicker
  • ****
  • Posts: 184
Umbrella rig question?
« on: 01/29/15 06:06 UTC »
Been thinking about getting the Umbrella rig mold and I was wondering if anyone that has it is making their own wire forms?

I have a Twistech bender and I bend a lot of wire.  I'd like to be able to make my own forms if possible. 

Thanks.

Offline Apdriver

  • Lunker
  • *****
  • Posts: 669
Re: Umbrella rig question?
« Reply #1 on: 01/29/15 07:27 UTC »
I make my own harnesses. It's doable. I'm not familiar with the twistech. I use a Hagens professional. I also use a different arig mold. It is a two cavity mold with 1/4 and 3/8 oz. heads. Same harness fits both sizes.

Offline rmturner54

  • Minnow
  • *
  • Posts: 6
Re: Umbrella rig question?
« Reply #2 on: 07/16/21 11:39 UTC »
I also have the mold and make my own wires. I also use a Hagens wire forming tool. So far I have only made  4 wire A rig

Offline rmturner54

  • Minnow
  • *
  • Posts: 6
Re: Umbrella rig question?
« Reply #3 on: 07/16/21 11:41 UTC »
another picture

Offline WALLEYE WACKER

  • Lunker
  • *****
  • Posts: 4498
    • WALLEYE WACKER
Re: Umbrella rig question?
« Reply #4 on: 07/16/21 15:52 UTC »
There are a ton of ways to make wire fries depending on the state as far as how many wires. We’re I live it’s 3 I’ve made. The tie point A single and the bubbled I wire it grow the other a tie it if there is enough room solder it together for more room.
May your days be filled with sun shine and you always have a tight line. AMEN

Offline efishnc

  • Lunker
  • *****
  • Posts: 2007
Re: Umbrella rig question?
« Reply #5 on: 07/17/21 09:34 UTC »
I also have the mold and make my own wires. I also use a Hagens wire forming tool. So far I have only made  4 wire A rig

Excellent work, rmturner!