I tend to favor EWG, Gamakatsu (3/0 and 5/0 584, and a few 5/0 SkipGaps) mostly but there are a few 3/0 Trokars in there. I do have quite a few Owner 5101 which is a Longer-shank Sproat Bend...these are good for rigging Tubes that have the Point Skin-hooked because the "Height Offset" between the Eye and Point (Point/Eye horizontal) is major which favors the thickness of a Tube. I also like these for "traditional" Worm-rigging where the Point is buried in the Worm Body at an Angle, slightly upwards...I find a 7.5" Ribbontail likes being rigged as such.