Custom Baits - Forum
Jigs, Spinnerbaits and Sinkers => Bass Jigs => Topic started by: C@TCH on 02/07/20 20:11 UTC
-
I have a Do-It Mold Ark-3198FS any info on how to use it.
Can’t find any info on Do-It
(https://i.postimg.cc/2bWv2HVz/D5-DB8-B4-F-A4-CD-4465-AC87-D19-D3-B302-E5-E.jpg) (https://postimg.cc/2bWv2HVz)
(https://i.postimg.cc/HJRX0GWZ/515745-B3-C3-CF-47-D5-9-FA5-942-CA485607-A.jpg) (https://postimg.cc/HJRX0GWZ)
-
Is the mold a 1/4 3/8 1/2?
You could tie hair on it or use a skirt along with plastic.
A great jig all in all.
This looks to be the same mold https://store.do-itmolds.com/Arky-Style-JigbrSz-14-38-12brHk-730-or-575brCollar-Ball_p_1055.html
The way that mold orientation is it would next to impossible to put a wire form in.
If you like that shape of head here is a spinnerbait mold.
https://store.do-itmolds.com/Style-C-Spinner-JigbrSz-14-38brHk-253-or-L255brCollar-Ball_p_1017.html
-
Welcome aboard C@tch.
That's another oldie of a mold. Its a spinner bait mold. Orange handles are a give-away as to age. I'm not sure if Do-It sells a wire form for that mold or not. It will take a 730 style hook.
The mold can be used to make a plain Arky style flipping jig with a weed guard by simply using a hook and an BPH-532 pin insert to create the weed guard pocket, then trimming the flash on the jig heads, painting and finally gluing in an FG-40 weed guard.
The hooks, weed guards and the insert pins are all still available for this mold so I'd use it as a flipping jig mold and forget about the spinner aspect.
-
Is the mold a 1/4 3/8 1/2?
You could tie hair on it or use a skirt along with plastic.
A great jig all in all.
This looks to be the same mold https://store.do-itmolds.com/Arky-Style-JigbrSz-14-38-12brHk-730-or-575brCollar-Ball_p_1055.html
The way that mold orientation is it would next to impossible to put a wire form in.
If you like that shape of head here is a spinnerbait mold.
https://store.do-itmolds.com/Style-C-Spinner-JigbrSz-14-38brHk-253-or-L255brCollar-Ball_p_1017.html
Sorry so late getting back, thanks for the reply. Yes it’s 1/4 3/8 1/2
-
Welcome aboard C@tch.
That's another oldie of a mold. Its a spinner bait mold. Orange handles are a give-away as to age. I'm not sure if Do-It sells a wire form for that mold or not. It will take a 730 style hook.
The mold can be used to make a plain Arky style flipping jig with a weed guard by simply using a hook and an BPH-532 pin insert to create the weed guard pocket, then trimming the flash on the jig heads, painting and finally gluing in an FG-40 weed guard.
The hooks, weed guards and the insert pins are all still available for this mold so I'd use it as a flipping jig mold and forget about the spinner aspect.
Thank you and
Thanks for the info