Umbrella rig question?

[Cannibul]

Been thinking about getting the Umbrella rig mold and I was wondering if anyone that has it is making their own wire forms?

I have a Twistech bender and I bend a lot of wire.  I'd like to be able to make my own forms if possible. 

Thanks.

[Apdriver]

I make my own harnesses. It's doable. I'm not familiar with the twistech. I use a Hagens professional. I also use a different arig mold. It is a two cavity mold with 1/4 and 3/8 oz. heads. Same harness fits both sizes.

[rmturner54]

I also have the mold and make my own wires. I also use a Hagens wire forming tool. So far I have only made  4 wire A rig

[rmturner54]

another picture

[WALLEYE WACKER]

There are a ton of ways to make wire fries depending on the state as far as how many wires. We’re I live it’s 3 I’ve made. The tie point A single and the bubbled I wire it grow the other a tie it if there is enough room solder it together for more room.

[efishnc]

I also have the mold and make my own wires. I also use a Hagens wire forming tool. So far I have only made  4 wire A rig

Excellent work, rmturner!