Essential Series Finesse Worm

[Carolina Fisher]

My mold finally came , I built a laminate plate . Sprayed the cavity with high heat engine paint . I will post more pics to this thread when I have time to shoot some more .

Here is a comparison pic before and after adding the high heat paint .



The worm on the bottom is the original finish . The top worm is after the mold has been modified . Basic Green Pumpkin Brown with Purple glitter .



Here is a laminate I ran last night , with my most productive worm this year . Oxblood and Peanut butter .


Sent from my SCH-I545 using Tapatalk

[Mike J]

That turned out nice! I have one ES mold and I'm going to try the paint mod on it. If it turns out as nice as yours it will defiantly make me look at the ES molds a little more. Great looking baits!

[Carolina Fisher]

Thanks goes to ctom for letting us know how to do this to these molds and showing us the thread he found on how to do it from crappie.com

[ctom]

"Thanks goes to ctom for letting us know how to do this to these molds and showing us the thread he found on how to do it from crappie.com" Carolina Fisher

No thanks necessary. This is what the site is about. Sharing. And I'm happy it worked out for you!

[Do-It Corp.]

Great looking colors and fun to see different tweaks to the baits.

[catchem]

Yup Tom helped ease my mind about the dull finish of those molds. Thanks for your help Tom!

[alwrenn]

Nice color combo!

[Carolina Fisher]

Been too busy but I started restocking my bags  for spring .



Sent from my SCH-I545 using Tapatalk

[Do-It Corp.]

Liken those....

[Muskygary]

Very nice!

[Steve J]

"Thanks goes to ctom for letting us know how to do this to these molds and showing us the thread he found on how to do it from crappie.com" Carolina Fisher

No thanks necessary. This is what the site is about. Sharing. And I'm happy it worked out for you!

Could you repost the paint instructions. I have just received the senko essential mold and it is very rough

[Lamar]

Could you repost the paint instructions. I have just received the senko essential mold and it is very rough

  What I did is cleaned the mold and painted it with glossy high heat engine paint both sides. Then took a pocket screwdriver and used it as a scraper and cleaned the vents out. Those guys took blue painters tape and taped both sides them took a razor blade and cut the tape off around the mold and then painted. I found that was more work then needed and my baits turn out fine.

[Steve J]

Thank you Lamar. That helps a bunch.

[Carl]

Nice looking baits.

[Carolina Fisher]

I had some leftover glimmer blue didn't know if I would like it . I'm gonna run more of these



Sent from my SCH-I545 using Tapatalk