Custom Baits - Forum
General => General Discussion => Topic started by: Muskygary on 01/31/19 13:06 UTC
-
To cold to fish or make baits; so I thought I'd start a list of molds for everyone to add to for the coming year. I'd like to see a 4 inch ES Ripper. I'd also like to see a 2 inch multi cavity ES Ripper.
-
In addition to your want of a ES2" Ripper, I'd up the ante to a cnc, 10 cavity 2.25" Ripper with much finer, deeper ribbing.
-
In addition to your want of a ES2" Ripper, I'd up the ante to a cnc, 10 cavity 2.25" Ripper with much finer, deeper ribbing.
^ This and a 3in version multi cavity that you can orient for duel injecting
-
I'd like to see these in 2019 but I'll settle for 2020...LOL!!! I'd like to see a Free Style Jig mold with lighter weights like 1/16oz, 3/32oz, and 1/8oz. I would really like to see a weedless walleye jig mold as well, 1/8oz, 1/4oz, 3/8oz, and 1/2oz and I'd love to see it made like the weedless banana head in that it can handle both 60 degree and 90 degree heavy wire hooks. And last but not least, I'd like to see a weedless football jig mold that uses a 90 degree hook in 1/8oz, 3/16oz, 1/4oz, 5/16oz, 3/8oz, and 1/2oz with a ring and barb collar.
-
^ This and a 3in version multi cavity that you can orient for duel injecting
5 cavity, end injection thru individual ports and done in ES
-
A 6 inch version of the 8 inch C- tail worm.
-
An ES 1.5 inch multi cavity crawdad
-
id love to see a multi cavity, 2.5" and 3" ripper with top inject, cnc or es does not matter. a 2.5" single cavity or es ripper would be great too. just wish they were easier to laminate good!
a lighter freestyle jig would be awesome too, 2 cavities each 1/16, 3/32 and 1/8, or 1 each of 1/16, 3/32, 1/8, 3/16 and 1/4. a production 1/8 ballhead with a wire keeper, or a combo 1/8 and 3/16 ballhead with a wire keeper would be awesome too. production for specific sizes of the midwest finesse (or combo of sizes, ie 1/16 and 3/32, or 3/32 and 1/8)
-
Same as Tom plus the and top pour mold.
-
Higher cavity molds and tail molds. I definitely need a tail mold for the 3.5" thin tail swimshad!
-
Longer 5/16" diameter Finesse Worms, longer than the 6"....7", 8".
Longer 3/8" diameter Skinny Carrots, longer than the 7"....8", 9", 10".
-
" longer than the 7"....8", 9", 10"."....BareKnuckleJigs
Just buy some garden hose and cut it to length. lol
How are things Gary?
-
A large THICK tailed grub.
For years I've been a fan of Kalin's Mogambo grub on my swim jigs, consistently back-seating my buddy as he fished Lucky Strike's super soft grubs on his swim jigs in the front. Since becoming a fan of Do-it's injection molding wares, the best compromise I've found is to splice the tail (mold) from the Stump Thumper to the back of the ES grub; this gives me color combinations I want with notably better vibration in the tail... but I would still like to see an even thicker tail (and increasing overall production would be a plus as well).
-
Im also with Mike J on tail molds for both thickness of swim shad tails , tip mold for the senko and in general any thing with a tail. For CTom fat fork tail mold.
-
Screwlock Jighead molds suited for A-Rigs/Swimbaits/Inshore
1/32-1/16-1/8-3/16-1/4
3/0-5/0 hooks
Man, y’all would sell a ton of these
Screwlock Snootie or Poision Tail Gulf coast special. :)
-
Free Style Jig mold with lighter weights like 1/16oz, 3/32oz, and 1/8oz-----2 cavities each 1/16, 3/32 and 1/8!
Please?
-
The shad bait lure with an eye in the back SBL-3-MB is exellent. The one without I find utterly useless other than for own moding.
A version with a pectorial eye instead of the one in the nose would make for a lure that doubles as great vibrating lure and a tailspinner. I had myself a cavity moded that way and a 5m lot of custom wire forms made. Cost me an arm and a leg, but excellent result. Also, an intermediate size around 2oz would be nice. Far more nice than the 3&4 oz ones.
(https://up.picr.de/34980454yo.jpg)
-
That mold looks like it would be a fun injection with plastic.
-
A 5 to 10 cavity Hellgrammite mold in ES series.
-
Freestyle jigs in production molds.
-
A spinnerbait mold in 1/8 oz that will accept a #1 or #1/0 staight hook instead of the spinnerbait wire. In production format, 3 or 4 cavities.
-
In addition to your want of a ES2" Ripper, I'd up the ante to a cnc, 10 cavity 2.25" Ripper with much finer, deeper ribbing.
On all sizes of the ripper.
-
Screw lock Poison Tail. Tiny Berry? Baby Berry scaled down to the size of the 3" twin tail Chub Grub. All the Chub Grub sizes offered in single tail.
-
I'd like to SE a 2.5in plastic catfish dip worm. I'd like to see the worm polka dotted with circle indents to hold the dip bait.
I'd like to see a small ice fished lead mold for a mooska style ice jig.
Quick swap type of bottom bouncer mold
-
I would like to see this mold >>> Round Head Jig w/Screw-Loc Part Number:3471
oz: 1/16, 1/8, 3/16, 1/4, 5/16, 3/8
Hk: 570 or 575
Collar: None
Done in a 1/32 with 4 Cavities and 1/16 4 Cavities...
Or 1/32 with 4 Cavities and 1/24 with 4 Cavities...
Or 1/24 with 4 Cavities and 1/16 with 4 Cavities...
-
1/32 and 1/16 football head with wire keeper (4 of each or a production mold for each)
1/32 and 1/16 pill head jig with slots for eyes and slot for crane swivel to make it an underspin
1/32nd, 1/16th and 3/32nd walleye head with eye sockets with a wire keeper (2 or 3 of each size)
-
I'd like to see a 4.5 big foot in multi cavity hell
I'd settle for the 4 or maybe a mold that you can do both frogs with have a swim and a topwater but hey that's just me
Sent from my SM-G955U using Tapatalk
-
maybe it wouldn’t work but I would like to see some stand alone multiple cavity ES laminant molds for existing CNC and ES molds. Hinged or not. Cheaper/easier to produce than CNC I would guess and we could paint them if a shiny finish is desired. It might be interesting to see a CNC laminated to the rough sand cast finish in some baits. It would have to be better than how I’m doing it now.
-
I would like to see me quick swap sinker molds.
A bass casting mold only with the stem for a quick swap, and a bottom bouncer mold with the bottom bouncer having a stem for a quick swap.
-
Pro mold 4,5” ring-it 12 cavity if possible.
-
Pro mold 4,5” ring-it 12 cavity if possible.
Yes!
-
1/8 1/4 ounce beaded chain keel sinker
-
would like to see a 1/32 1/16 ounce tube jig that would handle a steelhead hook. I know I could modify the one I have then I still end up buying another mold to make regular tube jigs again. so just make one that will handle a heavy hook so I can make looper bugs that hold up to Northshore steelhead.
-
I would like to see some more Crappie /Panfish soft Plastic Molds.