Custom Baits - Forum

Soft Plastic Bait Making => Soft Plastic and Plastic Baits - How To??? => Topic started by: Les Young on 01/22/20 11:46 UTC

Title: Dual Injector?
Post by: Les Young on 01/22/20 11:46 UTC

Do you have to purge the air when using a do-it dual injector? I always do my single hand injectors, but see lots of videos where they don’t. I thought about the dual, but if you have to purge the air aren’t you taking a chance on the tips coming off? Thanks

Title: Re: Dual Injector?
Post by: ctom on 01/22/20 12:04 UTC

When I have the injectors full, I invert the whole thing and stand the unit on the injector knobs, attach the blending block and carefully push down until plastic is visible in the dual nozzle from each injector. Then I inject.

Title: Re: Dual Injector?
Post by: DF on 01/22/20 13:41 UTC

I purge the dual injector the same as the single. The tips will stay on if everything is up to temp. It's when the plastic starts to cool that it can force the tips off.

Title: Re: Dual Injector?
Post by: Les Young on 01/23/20 20:47 UTC

Thanks guys.?im thinking about selling my basstackle injectors to buy the dual & them picking up another single. I have  a 6 & a 10 ounces both.