Custom Baits - Forum
General => General Discussion => Topic started by: BobTheBeast007 on 02/06/20 13:34 UTC
-
I have 2 of the 4 oz do-it injectors one brand new the other a couple years old, I noticed the new one seemed like it wasn’t filling all the way with plastic (almost like it’s drawing air from the back). I never had this problem with the old one until a few days ago when I replaced the o rings and now it’s doing the same thing. It’s not that big of an issue but I used to be able to fill 2-3 molds with one injector but now it’s only drawing enough barely fill 1. Any idea what could cause this and how I can fix it?
-
You might try buying the next size up in diameter O-rings... Any good hardware store should have some.
-
I have 2 of the 4 oz do-it injectors one brand new the other a couple years old, I noticed the new one seemed like it wasn’t filling all the way with plastic (almost like it’s drawing air from the back). I never had this problem with the old one until a few days ago when I replaced the o rings and now it’s doing the same thing. It’s not that big of an issue but I used to be able to fill 2-3 molds with one injector but now it’s only drawing enough barely fill 1. Any idea what could cause this and how I can fix it?
Bob, please give us a call at your earliest convenience, 319-984-6055. Ask for me and I will be happy to take care of this for you.
-
There's your answer. Great customer service.
-
Definitely great customer service they’re getting the problem taken care of.
-
Absolutely best customer service. I hope you can get your injector situation figured out I'm thinking about getting the bigger one they make soon.
-
They are spot on. Great company to deal with.
-
The big injectors are the best I have used.