Custom Baits - Forum

Jigs, Spinnerbaits and Sinkers => Sinkers => Topic started by: Agronomist_at_ia on 06/12/21 01:03 UTC

Title: Bottom bouncer mod to quick swap bottom bouncer
Post by: Agronomist_at_ia on 06/12/21 01:03 UTC

Modded an older bottom bouncer mold, and can make the quick swap bottom bouncers now.

Title: Re: Bottom bouncer mod to quick swap bottom bouncer
Post by: Agronomist_at_ia on 06/12/21 01:04 UTC

Do it mod mold on bottom store bought on top.

Title: Re: Bottom bouncer mod to quick swap bottom bouncer
Post by: ctom on 06/12/21 08:59 UTC

That's slick. Do you have any issues with the tubing pulling off the weigh or the clip coming out of the tubing under a load?

Title: Re: Bottom bouncer mod to quick swap bottom bouncer
Post by: Agronomist_at_ia on 06/14/21 00:08 UTC

Quote from: ctom on 06/12/21 08:59 UTC

That's slick. Do you have any issues with the tubing pulling off the weigh or the clip coming out of the tubing under a load?

No. But if the bottom bouncer get hung up…you just apply steady solid pressure on it and the tube will eventually pop off.

I aven’t lost one yet. Bad part is you need to find an old style bottom bouncer mold