Custom Baits - Forum
General => General Discussion => Topic started by: Mic on 06/13/12 12:23 UTC
-
Does, or did, anyone else have issues with the ,baits sticking to the bags? I have put worm oil, scent a combonation of both but the baits seem to dry out and start sticking to the bags. This isn't a big deal but makes it a pain to get the lures out of the bags.
-
What type of bags are you using? Also, I assume you are using CCM plastisol?
-
so far it doesn't matter what type of bag I use. I have purchased some of the 4 x 10 from ccm, used freezer bags for my son and I to use doesn't matter. Plastic, no it isn't ccm. I am using lc plastic.
-
I used LC plastic when I first started and the soft formula in particular was really sticky. The medium was a little better. Try mixing the the plastic in the bottle prior to heating it could be that the plastic components have settled in the bottle.
-
Add salt in with your baits and don't add any worm oil.
I use LC soft at times and don't have any issues with it sticking or being sticky.
After you add the salt, do a "shake and bake" deal. Mix it good and you won't have that issue anymore.
Jim
-
I have heard of salt being used to prevent sticking.
...Bill
-
I use a few drops of scent and then salt. Works great!!!!
Jim
-
+1 on what Ghost says. Salt in the bag and shake 'em up.
-
what type of salt, sea salt, table salt etc
-
Cheapest you can get!!!!
Jim