Custom Baits - Forum

Soft Plastic Bait Making => Soft Plastic and Plastic Baits - How To??? => Topic started by: 412BaitCo on 09/15/12 15:49 UTC

Title: Laminates with heavy salt?
Post by: 412BaitCo on 09/15/12 15:49 UTC

Has anyone tried this if so how do they bond?

Title: Re: Laminates with heavy salt?
Post by: ghostbaits on 09/15/12 20:18 UTC

Works great with twinjector....

Jim

Title: Laminates with heavy salt?
Post by: 412BaitCo on 09/15/12 20:43 UTC

That twin injector keeps being a thorn in my side lol.

Title: Re: Laminates with heavy salt?
Post by: Billmo on 09/15/12 23:57 UTC

once you start getting nice baits you wont put it down..

Title: Re: Laminates with heavy salt?
Post by: Frank on 09/16/12 00:46 UTC

Work with the Twinjector a little and a light will go off, and you will get it. Heavy salt is tricky but way easier when you get how the Twinjector works. Dont rush, get the plastic at the same temp, fill the injectors put it on the block and push slow but positive. Try and get the mold ready with the block on it and in a place that is easy to get the injectors to without hesitation. You will get it. Frank

Title: Re: Laminates with heavy salt?
Post by: MonteSS on 09/16/12 01:30 UTC

I make sticks with heavy salt and a lam plate and the bonded very well. No probs at all.

....Bill