Custom Baits - Forum

General => General Discussion => Topic started by: ctom on 08/10/13 11:37 UTC

Title: EWelcome aboard Mr. Skarlis
Post by: ctom on 08/10/13 11:37 UTC

Here's a welcome to the Do It crew.

Title: Re: EWelcome aboard Mr. Skarlis
Post by: TommySkarlis on 08/10/13 12:39 UTC

Thanks ctom - so far I have really enjoyed reading your and others posts here.  I've been a "watcher" for a while - but now it's time to start getting more involved!  I've been a tackle crafter since I was 12 - and really jazzed about the new soft baits and new molds!

Fish On!!!

Title: Re: EWelcome aboard Mr. Skarlis
Post by: CrabbyBass on 08/10/13 12:50 UTC

Welcome Tommy!

Title: Re: EWelcome aboard Mr. Skarlis
Post by: WALLEYE WACKER on 08/10/13 13:17 UTC

Tommy Welcome!! What a great time you will have with the soft plastics. mike

Title: Re: EWelcome aboard Mr. Skarlis
Post by: superharmonix on 08/10/13 13:57 UTC

Welcome aboard and you may as well go ahead and give your wife a gift card to your local kitchen store since if you haven't already, you probably will abscond with her measuring cups and bowls, measuring spoons, microwave, griddle, presto pots, toaster over, etc.  Not sure how old you are now, but since you said you have been making plastic since you were 12,You probably already have quite the array of kitchen tools.

We're glad you are here with this crazy bunch of folks.

Title: Re: Welcome aboard Mr. Skarlis
Post by: jl3140 on 08/10/13 14:20 UTC

Welcome to the forum Tommy!

Josh

Title: Re: EWelcome aboard Mr. Skarlis
Post by: Jerry V on 08/12/13 16:21 UTC

For those of you who aren't as familiar with Tommy as others here is a link to a video that helps explain some of that.

http://www.youtube.com/watch?v=3mVL981ltbs&feature=c4-overview&list=UUVgzN4VnCmLOXJb3DCxcPlQ

It's nice to have you on board here at the forum Tommy, thank you and we're all looking forward to it.

Jerry

Title: Re: EWelcome aboard Mr. Skarlis
Post by: Denny Welch on 08/12/13 17:08 UTC

Welcome to the forum, Tommy.  I've enjoyed your videos on Do-It's web site and am looking forward to your participation in the forum.  Sometimes this forum thing seems to take on a life of its own.  The grizzled old vets are tossing out years of experience in a couple paragraphs and the newer guys (and Buffy) are doting on every word.  What it all boils down to, though, is that we all share in this common interest.  Most of us probably spend way too much time in our shop or garage, usually alone, just tryin' to make something a fish will bite.

Welcome aboard.

Title: Re: EWelcome aboard Mr. Skarlis
Post by: Billmo on 08/12/13 17:45 UTC

Welcome  Welcome  Welcome

Title: Re: EWelcome aboard Mr. Skarlis
Post by: MO QWACK on 08/14/13 20:43 UTC

Welcome to the nut house