Custom Baits - Forum

Jigs, Spinnerbaits and Sinkers => Bass Jigs => Topic started by: kris brantner on 03/06/14 02:32 UTC

Title: need a few samples of the shad head jig rig mold
Post by: kris brantner on 03/06/14 02:32 UTC

Looking to buy like a half doz poured but not pained heads feom this mold. Would like to see if I can generate some interest before I buy the mold. Let me know if ya can help me out. Thanks

Title: Re: need a few samples of the shad head jig rig mold
Post by: toadfrogbaits on 03/06/14 07:25 UTC

you talking the wedge shaped and what weight .

Title: Re: need a few samples of the shad head jig rig mold
Post by: kris brantner on 03/06/14 18:38 UTC

Yeah like the a rig heads. I think there are 3 cavities ide take two in each size with a round bend 5/0 hook

Title: Re: need a few samples of the shad head jig rig mold
Post by: smalljaw on 03/07/14 07:40 UTC

You are looking at the shad head rig jig with wire keeper, is that correct? Which sizes and the mold calls for a 3/0 and a 4/0 hook so I'm not sure a 5/0 will work but I haven't tried one as I have the mold.

Title: Re: need a few samples of the shad head jig rig mold
Post by: kris brantner on 03/07/14 15:49 UTC

You can usually go a hook size or two bigger than the mold suggests.  But yes this is the mold im looking for. Two in each cavity is what I would be needing.

Title: Re: need a few samples of the shad head jig rig mold
Post by: smalljaw on 03/09/14 16:02 UTC

I got samples of the 5/0 hook and it is a no go, I can put the 4/0 in the first 3 cavities listed for 3/0 but a 5/0 doesn't work.

Title: Re: need a few samples of the shad head jig rig mold
Post by: kris brantner on 03/12/14 01:52 UTC

Ight. 4/0 It is. Pour me some up if ya would and let me know how much I owe ya

Title: Re: need a few samples of the shad head jig rig mold
Post by: smalljaw on 03/12/14 14:13 UTC

Which cavities? there are 6 cavities starting with 1/8oz and each one after is 1/16oz bigger up to 7/16oz.

Title: Re: need a few samples of the shad head jig rig mold
Post by: kris brantner on 03/12/14 20:47 UTC

How about 1 in each cavity with the biggest hooks you can fit in each one