Custom Baits - Forum

Jigs, Spinnerbaits and Sinkers => Painting and Finishing Lures => Topic started by: walleyetracker85 on 11/25/14 07:30 UTC

Title: Columbia coatings vs roseys
Post by: walleyetracker85 on 11/25/14 07:30 UTC

Hey guys just wondering if anybody here uses Columbia coatings? I never hear them mentioned and wondering why? Am I better off sticking with rosey's?

Title: Re: Columbia coatings vs roseys
Post by: Muskygary on 11/25/14 07:34 UTC

They both have good powder. I would use either one.

Title: Re: Columbia coatings vs roseys
Post by: walleyetracker85 on 11/25/14 07:37 UTC

Ok thanks gary! You just hear alot about roseys and not much about Columbia so I thought maybe they were bad or something

Title: Re: Columbia coatings vs roseys
Post by: Fatman on 11/25/14 08:09 UTC

No problems at all with Columbia it's good stuff

Title: Re: Columbia coatings vs roseys
Post by: Kasilofchrisn on 11/25/14 08:34 UTC

I haven't had issues with Columbia coatings paint either.
I know several guys on TU are using it as well.
I recently bought some plain white for base coating from Cadmans custom jigs and it works great and is very inexpensive also. He only has limited colors but its worth checking for the quality and price.

Title: Re: Columbia coatings vs roseys
Post by: Edgecrusher on 11/25/14 13:46 UTC

I use Columbia coatings since switching from csi great stuff and good value

Title: Re: Columbia coatings vs roseys
Post by: Cannibul on 11/27/14 08:07 UTC

I've used Pro Tec, Roseys, Columbia and Prismatic.

I know one of the local tackle makers pretty well and he gives me samples of paints and top coats he uses.  Prismatic has some top coats that blow my mind.  They also have some pretty good paints.