Custom Baits - Forum
Soft Plastic Bait Making => Soft Plastic and Plastic Baits - How To??? => Topic started by: Scotty on 01/12/15 17:27 UTC
-
Hello,
I was just curious if anyone knows how to do swirls with two different colors of plastic?
Not sure if this is the right place for this question but it is a start.
-
Two injectors and a blending block. Injector a little of one color then the second color and switch back and forth til the mold is full.
-
That won't make to were you just have one color on top and one on bottom working you way until the mold is full?
-
Not if you alternate colors
-
Here's a swirl that I made earlier. For this I used a twin injector and gave slow and even pressure while I was turning it.
(http://i766.photobucket.com/albums/xx308/lamar2b/photo_zpsd7c2ffb4.jpg) (http://s766.photobucket.com/user/lamar2b/media/photo_zpsd7c2ffb4.jpg.html)
-
Nice Lamar
-
Cool senkos! Why's so much of the cool stuff done with a twin injector?!?! Price tag on those bad boys are steep!
-
Cool senkos! Why's so much of the cool stuff done with a twin injector?!?! Price tag on those bad boys are steep!
Well it's not like they ever go bad. Like many other hobbies. If your going to play you got to pay.
-
X2 bucko!
-
Here's a swirl that I made earlier. For this I used a twin injector and gave slow and even pressure while I was turning it.
"Sweet"
May give that twist to some of my baits. :)
What type of dual Injector are you using ::)
billygee ::)
-
Bangin' Senkos...like Drumstick.
-
I bought a blending block then picked up a second injector Works great
-
Thank You guys a lot. I am really starting to like this forum. :D
-
Here's a swirl that I made earlier. For this I used a twin injector and gave slow and even pressure while I was turning it.
"Sweet"
May give that twist to some of my baits. :)
What type of dual Injector are you using ::)
billygee ::
http://www.basstackle.com/TWINJECTOR_p/twinjector.htm
-
Take the twin injector and blending block. Shoot one color In and then shoOt the other color. You will see the first injector rise as plastic goes back in it. Try it a few times, you will get the hang of it.
-
I bought a blending block then picked up a second injector Works great
Did you get the blending block from bass tackle and did you use the injectors from do-it
Thank you
-
Also will the dual injector from bass tackle work with the do-it molds
-
Also will the dual injector from bass tackle work with the do-it molds
Yes
-
Thank you, I received a request for some swirl baits but I don't know if I should get the dual injector or the blending block and another injector
-
I believe when you buy that you get both. At least I did.