Custom Baits - Forum

Jigs, Spinnerbaits and Sinkers => Lures => Topic started by: Cannibul on 01/29/15 06:06 UTC

Title: Umbrella rig question?
Post by: Cannibul on 01/29/15 06:06 UTC

Been thinking about getting the Umbrella rig mold and I was wondering if anyone that has it is making their own wire forms?

I have a Twistech bender and I bend a lot of wire.  I'd like to be able to make my own forms if possible. 

Thanks.

Title: Re: Umbrella rig question?
Post by: Apdriver on 01/29/15 07:27 UTC

I make my own harnesses. It's doable. I'm not familiar with the twistech. I use a Hagens professional. I also use a different arig mold. It is a two cavity mold with 1/4 and 3/8 oz. heads. Same harness fits both sizes.

Title: Re: Umbrella rig question?
Post by: rmturner54 on 07/16/21 11:39 UTC

I also have the mold and make my own wires. I also use a Hagens wire forming tool. So far I have only made  4 wire A rig

Title: Re: Umbrella rig question?
Post by: rmturner54 on 07/16/21 11:41 UTC

another picture

Title: Re: Umbrella rig question?
Post by: WALLEYE WACKER on 07/16/21 15:52 UTC

There are a ton of ways to make wire fries depending on the state as far as how many wires. We’re I live it’s 3 I’ve made. The tie point A single and the bubbled I wire it grow the other a tie it if there is enough room solder it together for more room.

Title: Re: Umbrella rig question?
Post by: efishnc on 07/17/21 09:34 UTC

Quote from: rmturner54 on 07/16/21 11:39 UTC

I also have the mold and make my own wires. I also use a Hagens wire forming tool. So far I have only made  4 wire A rig

Excellent work, rmturner!