Custom Baits - Forum

Jigs, Spinnerbaits and Sinkers => Request a Lead Mold => Topic started by: Finaddict on 09/22/15 19:11 UTC

Title: Production 3/16 oz. minnow head with wire keeper.
Post by: Finaddict on 09/22/15 19:11 UTC

After looking through this board I notice I am not the only one that would like to know what Do-It Corp. has against the 3/16 oz. production mold. I read a request for a 3/16 oz. shad dart and a 3/16 oz. tapered tube head. I would like to add a 3/16 oz. minnow head to the list. Over the years I have sent Do-It Corp. several messages asking about this very thing. I always get the same answer....... we produce a blank mold for custom jig heads.

Title: Re: Production 3/16 oz. minnow head with wire keeper.
Post by: MO QWACK on 09/22/15 20:08 UTC

I do like me some 3/16! 

Title: Re: Production 3/16 oz. minnow head with wire keeper.
Post by: ACRon on 01/11/16 17:42 UTC

This is a common theme.  Many requests in several different mold styles for 3/16.  Come on Do-it.  Build it we will come.

Title: Re: Production 3/16 oz. minnow head with wire keeper.
Post by: Mike J on 01/11/16 22:42 UTC

I like a 3/16 too!

Title: Re: Production 3/16 oz. minnow head with wire keeper.
Post by: Justin9j on 01/12/16 17:08 UTC

3/16 is my go to

Title: Re: Production 3/16 oz. minnow head with wire keeper.
Post by: Masrok on 03/12/16 09:09 UTC

Add me to the list, unless of course they have already made this mold.