« previous next »
Pages: [1]

Author Topic: Four color laminates  (Read 4910 times)

Offline MonteSS

  • Lunker
  • *****
  • Posts: 942
Four color laminates
« on: 01/23/12 13:46 UTC »
Was wondering if this would work. Not that I am going to try it LOL



....Bill
Logged

Offline superharmonix

  • Lunker
  • *****
  • Posts: 868
Re: Four color laminates
« Reply #1 on: 01/23/12 13:49 UTC »
I like it!  I will say this- you better make sure those blending blocks are nice and warm!  I can't wait to see pics!  Maybe one of us will have to come out and visit with two more blending blocks and another Twin (and another blending blocks to join the two main blending blocks of course) and shoot that with you at the same time for an 8 color bait.
Logged

Offline Jason

  • Global Moderator
  • Lunker
  • *****
  • Posts: 2304
  • Tight Lines!
Re: Four color laminates
« Reply #2 on: 01/23/12 14:00 UTC »
I am not 100% but I think Coosa Redeye has made some this way.  They turned out well.  I personally don't even have the coordination to attempt it.

Jason
Logged

Offline pjmcla

  • Lunker
  • *****
  • Posts: 1721
Re: Four color laminates
« Reply #3 on: 01/23/12 14:13 UTC »
I know a three laminate has been done by several folks.  So if a three, then a four would conceivably be possible.  I would think a four would be a two person operation.  In my case a three person operation; I would be watching and offering encouragement   :D. 
Logged

Offline andrewlamberson

  • Lunker
  • *****
  • Posts: 2463
Re: Four color laminates
« Reply #4 on: 01/23/12 14:22 UTC »
Or.... use the new laminate block for your mold (when available for your favorite) and use the twin injector and blending block on side a...then side b (at least that's what I'm going to try tonight).

The "tower of power" you have in your drawing looks like an accident waiting to happen to me. Heck...I still have a heck of a time with a single twin injector and blending block!!!

You know....we are getting dangerously close to needing "an intervention" ! :o
Logged
" You can't buy happiness...But you can buy fishing gear...and that's kind of the same thing"

Offline firetiger

  • Kicker
  • ****
  • Posts: 365
Re: Four color laminates
« Reply #5 on: 01/24/12 17:03 UTC »
I've read where it has worked.  I have not tried it, but as long as you can push all four evenly, you'll get the results you want.
Logged

Offline Dave

  • Kicker
  • ****
  • Posts: 382
Re: Four color laminates
« Reply #6 on: 01/24/12 19:37 UTC »
If someone here tries this concoction out, please post some pics of the baits. This would be a sight to see.  8)
Logged

Offline Denny Welch

  • Lunker
  • *****
  • Posts: 2377
    • Believe Baits
Re: Four color laminates
« Reply #7 on: 01/25/12 10:16 UTC »
Bill...you might consider a 3/4" - 1" aluminum bar bored to fit over the knobs of the injectors.  Applying pressure to the bar might alleviate the problem of even pressure being applied to all of the injectors.  Just a thought from someone completely lacking in any mechanical abilities.
Logged
Until next time.

Denny

denny@believebaits.com
www.believebaits.com

Offline MonteSS

  • Lunker
  • *****
  • Posts: 942
Re: Four color laminates
« Reply #8 on: 01/26/12 21:11 UTC »
I have absolutely no plans so trying this. Was just wondering if it could be done.

Someone on another forum asked about 4 colors swirls so it got me thinking.

....Bill
Logged

Offline ghostbaits

  • Lunker
  • *****
  • Posts: 1385
    • Home of Ghost Baits: Hand poured and Hand injected soft plastics
Re: Four color laminates
« Reply #9 on: 01/27/12 13:51 UTC »
It works as diagrammed. It is tough to keep everything together and not safe to me.

Jim
Logged
Pages: [1]
« previous next »