OK, I was able to post a picture to the Gallery under "Jigs and Spinners" I got my mold today and poured up a hundred using different hooks. Starting at the bottom is 1/8 with a 3/0 570 hook, 1/4, 3/8 are with a 4/0 Lil Nasty 500 hook. 1/2 is with a 5/0 32746 hook, and the 5/8 is with a 6/0 32746 hook. The spinner blades with the hooks are- from bottom up: first three are size 3.5 blades and the last two are size 4 blades. Hope this helps someone as to hook size and blade size. The hooks and spinner keeper loaded easy and the mold poured great. The first shot was with no hooks to warm the mold up, thereafter the mold was loaded, first with the blade keepers, then the hooks (worked good this way) All of the cavities filled completely. As you can see in the picture I didn't get around to cutting the sprues off yet.
