Socket eye

[T-Dave]

Any suggestions on socket eye mold in 1/8,1/4&3/8 2/0&3/0 black nickel hooks for saltwater?

Thanks


Sent from my iPhone using Tapatalk

[efishnc]

I guess I would recommend the poison tail... but I'm not sure if a 30* jig is desirable or if you were hoping to get a 90* jig.  It's a great mold, but try to clarify some other points you are looking to satisfy if this doesn't fit your needs.  (FYI: I filed a little away on mine to accommodate a 2/0 hook in the 1/8oz jig, but I can still use 1/0 if I want.)

[Partycrasher]

Its possible to make eye sockets in molds.  I find a nail which is the diameter I need and clean it up on a Dremel or sander till it is perfectly round and clean edges.  Now locate the point in the mold where you want it and drill a small hole the size of the nail (not the head).  Slide the nail in.  I use a little JB Weld in the hole and behind the head to make sure lead cant get behind it.  Repeat both sides.  I may have to touch up the JB around the nail head with a fine Dremel or a dental tool but you will end up with a nice eye socket. 

Marc