Author Topic: Finesse jig mold hook?  (Read 2342 times)

Offline ganochta

  • Minnow
  • *
  • Posts: 1
Re: Finesse jig mold hook?
« Reply #15 on: 02/07/21 20:23 UTC »
I have been trying to find where I can order VMC 7340 RJ hooks to use in mold modification to pour the custom weedless Ned jigs.  If anyone can help I  would be very appreciative.  Thanks

Offline 21xdc

  • Lunker
  • *****
  • Posts: 532
Re: Finesse jig mold hook?
« Reply #16 on: 02/08/21 03:53 UTC »
How many do you want?  I bought a few 1000 and not using many... Leave a number for me to reach you at.

Offline efishnc

  • Lunker
  • *****
  • Posts: 1859
Re: Finesse jig mold hook?
« Reply #17 on: 02/08/21 09:43 UTC »
Welcome to the forum ganochta... you are now part of our great forum family!


It's members like this that make it truly great>>>
How many do you want?  I bought a few 1000 and not using many... Leave a number for me to reach you at.

Online ctom

  • Lunker
  • *****
  • Posts: 9898
Re: Finesse jig mold hook?
« Reply #18 on: 02/08/21 11:38 UTC »
Unless you're using a twin injector the temp that the belly plastic was injected at means zip to what temp the top plastic is. One thing that creates issues is if the bellies are made and kept for a week or two then finished. They will skin over with the oil the plastic is known to exude after the baits are made. That oil has to be removed. #20 degree plastic is more than enough to weld the halves on small frys especially if one keeps some pressure on when the rod stops.