Author Topic: is there gonna be a 10'' ribbon tail laminate plate? (Read 2672 times)

DobynsTriton · « **on:** 06/14/12 04:47 UTC »

Looked for a lami plate for this worm but didnt find one .I was wondering if there was gonna be one released at some point in the future?

im picky about how it looks when i have to hand pour it in

BareKnuckleJigs · « **Reply #1 on:** 06/14/12 07:45 UTC »

Dob Bro, unless something's pretty different than the 10" from the 7", the Tail is probably too thin to shoot a laminate with a Plate, in the RT Worms.

DobynsTriton · « **Reply #2 on:** 06/14/12 08:21 UTC »

ahhh man i didnt think of that

theres my brain fart for the day lol

BareKnuckleJigs · « **Reply #3 on:** 06/14/12 08:48 UTC »

Sorry bout that. I get caught up with humor quite often.

ghostbaits · « **Reply #4 on:** 06/14/12 10:13 UTC »

Twinjector will laminate it down to the tip of the tail....

Jim

Jason · « **Reply #5 on:** 06/14/12 10:44 UTC »

This is correct, even on the 14" which has a little thicker tail, they are just to thin and have to far to travel to shoot twice. You can do the bodies, but if you want the tail also you have to use a blending block.

Jason

BareKnuckleJigs · « **Reply #6 on:** 06/14/12 11:10 UTC »

Man those Components sure would be handy...

(only about 1.5-2 PSI)

TheDreamer · « **Reply #7 on:** 06/14/12 11:29 UTC »

Sorry I havn't been posting guys, dislocated and chipped my 5th metacarple in my right hand. Here is one I did a while back, the colors were just left over scrap. Hope you like it. (Not a hand pour!)

Drew

Denny Welch · « **Reply #8 on:** 06/14/12 11:48 UTC »

Hey Drew...it's pretty hard to punch away on a keyboard with a busted up hand. I hope you get well soon. Good looking ribbon tail.

TheDreamer · « **Reply #9 on:** 06/14/12 12:01 UTC »

Thanks Deny, very true about the keys. That lami was actually done with a separate CCM lami plate from a different mold.

Author Topic: is there gonna be a 10'' ribbon tail laminate plate? (Read 2672 times)

DobynsTriton

is there gonna be a 10'' ribbon tail laminate plate?

BareKnuckleJigs

Re: is there gonna be a 10'' ribbon tail laminate plate?

DobynsTriton

Re: is there gonna be a 10'' ribbon tail laminate plate?

BareKnuckleJigs

Re: is there gonna be a 10'' ribbon tail laminate plate?

ghostbaits

Re: is there gonna be a 10'' ribbon tail laminate plate?

Jason

Re: is there gonna be a 10'' ribbon tail laminate plate?

BareKnuckleJigs

Re: is there gonna be a 10'' ribbon tail laminate plate?

TheDreamer

Re: is there gonna be a 10'' ribbon tail laminate plate?

Denny Welch

Re: is there gonna be a 10'' ribbon tail laminate plate?

TheDreamer

Re: is there gonna be a 10'' ribbon tail laminate plate?