Author Topic: Eye size  (Read 14337 times)

Offline gone2long

  • Kicker
  • ****
  • Posts: 373
Eye size
« on: 01/06/13 15:50 UTC »
Hey guys this might be for Jerry but if you know I'm all ears I bought the SMJ-3-MF Weedless Casting Jig and to my pleasant surprise it has eye sockets which I don't see any info on as far as what size I need the pic on netcraft's site shows it without eyes so I assume this was a new addition to the mold, any ideas on size?

Offline Muskygary

  • Lunker
  • *****
  • Posts: 2996
Re: Eye size
« Reply #1 on: 01/06/13 17:05 UTC »
The do-it catalog says Size 2 or 1/8 for the 5/16 and 3/8 jigs. Size 2.5 or 5/32 for the 1/2 jig. Everyone should get a do-it catalog, there is a lot of useful in formation in it, plus I circle all the molds I have so I don't get mixed up when buying new molds. I just did a catalog count. I have 113 do-it molds!

Offline Muskygary

  • Lunker
  • *****
  • Posts: 2996
Re: Eye size
« Reply #2 on: 01/06/13 17:14 UTC »
If you go to www.do-it.com you can download a copy of their catalog.

Offline gone2long

  • Kicker
  • ****
  • Posts: 373
Re: Eye size
« Reply #3 on: 01/06/13 17:29 UTC »
Ha thanks I was going to do that last week never thought to see if it was updated over the web page, Thanks! Man 113 molds you must be a pouring machine I hope you sell and that's not your hobby stash :D :D

Offline Lamar

  • Lunker
  • *****
  • Posts: 2931
Re: Eye size
« Reply #4 on: 01/06/13 18:17 UTC »
How about try this web page.  http://www.do-itmolds.com  I think it will work better

Offline gone2long

  • Kicker
  • ****
  • Posts: 373
Re: Eye size
« Reply #5 on: 01/06/13 18:35 UTC »
Doh :D that's even funnier as I never looked on the Do It site I actually looked at my order from Jann's and the photo as well as the component list for that mold did not mention eyes ;) Thanks again!

Offline pjmcla

  • Lunker
  • *****
  • Posts: 1721
Re: Eye size
« Reply #6 on: 01/06/13 20:59 UTC »
Thanks - Muskygary -  Now I can show my wife your post and say ---
" See; I am not as bad as some are "   ;D  ;D.
I have my "share" of molds.
 

Offline Denny Welch

  • Lunker
  • *****
  • Posts: 2377
    • Believe Baits
Re: Eye size
« Reply #7 on: 01/06/13 23:43 UTC »
I only check my mail a couple  times a week and yesterday was that day.  I was weak kneed as I pulled out Bass Anglers Magazine, Barlow's 2013 catalogue, and Do-it's 2012 -2013 catalogue.  I had visions of sugar plums dancing in my head.  It was like an angler's vision of Nirvana.  I tippy toed much like a ballerina the couple hundred yards back to the house.  The neighbors turned their heads so as not to embarrass me.

I started with the TOC of BAM just to see what was what.  It was a local magazine that just went national.  Good read.  I then started on Do-It's catalogue and I couldn't put it down.  I think I had tears running down my face.  They actually market a RCBS Pro-Melt lead melter.  Paul and I "talked" about that unit a year ago and I covet it.  He swears by it.  I visualize myself wearing a Do-It t-shirt while pouring jigs and then quickly changing into my CCM t-shirt when pouring some craws.  I finally flipped out when I cut down Do-It's catalogue to fit inside my bible for this morning's services.

The straw that broke the camel's back was when Gary said that he had 113 molds.  I thought I was on Do-It's red carpet list with 25.  Oh, Man.

On a serious note...can you imagine when the next Do-It catalogue comes out with all the CCM stuff.  Can't wait.
Until next time.

Denny

denny@believebaits.com
www.believebaits.com

Offline Muskygary

  • Lunker
  • *****
  • Posts: 2996
Re: Eye size
« Reply #8 on: 01/07/13 03:25 UTC »
Thanks Lamar for putting up the corect web page. That 113 molds shows how old Im getting to be. It easy to get a bunch with garage sales and e-bay! This is a hobby collection and I only sell a little to friends. I don't want to count my plastic molds, but the number keeps increasing on them alsao! ;D

Offline Lamar

  • Lunker
  • *****
  • Posts: 2931
Re: Eye size
« Reply #9 on: 01/07/13 06:16 UTC »
 Musky I bow to you brother. 113 molds, wow ! I've made jigs for a lot of years now and I have molds that I have dremeled and reconfigured to make my own little creation that no one else has. I would love to go through your collection. I bet it's full of goodies. I'm like you. I never sell any. They take way to long to make. I give some to friends as Christmas presents. I pretty much have one guy I tournament fish with and he and I like to think outside the box. Other guys know we're doing this and are always trying to sneak a peak. We just laugh because we know they're doing the same thing. Sure does make this a fun sport.
  And now we have plastic !!!!! I very very new at this but this could be endless.
« Last Edit: 01/07/13 06:19 UTC by Lamar »