Author Topic: Powder Painting Weedless Jigs  (Read 10329 times)

Offline jl3140

  • Lunker
  • *****
  • Posts: 654
Re: Powder Painting Weedless Jigs
« Reply #15 on: 10/23/14 18:32 UTC »
Alright cool. I'll have to try the heat resistant tubing and 190 degrees for 20 instead of the hotter recommended temperature. Thanks for the replies.

Offline Justin9j

  • Lunker
  • *****
  • Posts: 1647
Re: Powder Painting Weedless Jigs
« Reply #16 on: 10/23/14 19:23 UTC »
Dragonfly where would a guy get that color?

Offline efishnc

  • Lunker
  • *****
  • Posts: 2145
Re: Powder Painting Weedless Jigs
« Reply #17 on: 10/23/14 19:35 UTC »
Dragonfly where would a guy get that color?

That's a CS (Do-it) color, #78; it is a blue/green hue that works for bluegills or early summer craws.

Offline efishnc

  • Lunker
  • *****
  • Posts: 2145
Re: Powder Painting Weedless Jigs
« Reply #18 on: 10/23/14 19:43 UTC »
The tool I showed the other day in a picture clears the eyes ok but those little red eye popper jobs are worthless.

The best way I've found to clear eyes is either to blow them clear while the jig is still warm.  If needing to clear after the jig has cooled, just reheat the eye a little and blow it clear.  (When I say blow it clear, imagine yourself as a little kid with bubble wand.)  Although this may not work for panfish jigs, it is no problem on bass jigs.


Offline Justin9j

  • Lunker
  • *****
  • Posts: 1647
Re: Powder Painting Weedless Jigs
« Reply #19 on: 10/23/14 20:29 UTC »
Thanks. Sounds like a color I need

Offline efishnc

  • Lunker
  • *****
  • Posts: 2145
Re: Powder Painting Weedless Jigs
« Reply #20 on: 10/23/14 23:15 UTC »
It's tasty!

Offline stephensharpe

  • Minnow
  • *
  • Posts: 3
Re: Powder Painting Weedless Jigs
« Reply #21 on: 10/24/14 17:55 UTC »
I absolutely cannot get this fluid bed functioning correctly. Anyone got any tips? I have a 2 inch pvc union with a 40 gallon aquarium pump. I have the valve the whole 9 yards. 2- 2.5 inches of pvc top and bottom side.. Havent been this aggrivated in a while.... >:(

Offline ctom

  • Lunker
  • *****
  • Posts: 11412
Re: Powder Painting Weedless Jigs
« Reply #22 on: 10/24/14 18:32 UTC »
I absolutely cannot get this fluid bed functioning correctly. Anyone got any tips? I have a 2 inch pvc union with a 40 gallon aquarium pump. I have the valve the whole 9 yards. 2- 2.5 inches of pvc top and bottom side.. Havent been this aggrivated in a while.... >:(

How's the humidity there where you live?
There are good ships
and wood ships
ships that sail the sea
but the best ships are friendships
and may they
always be ......An Irish Toast