Author Topic: EWG or Round Bend  (Read 9610 times)

Offline DF

  • Lunker
  • *****
  • Posts: 1468
EWG or Round Bend
« on: 04/08/15 15:01 UTC »
What type of worm hook do you like? EWG, round bend, or do you use both? I like extra wide gap hooks but I seem to be missing a lot of fish.

Offline pjmcla

  • Lunker
  • *****
  • Posts: 1721
Re: EWG or Round Bend
« Reply #1 on: 04/08/15 15:22 UTC »
I use EWG for most of my fishing.  Gamakatsu, Owner, and Trokar.  For pitching in thick stuff I will use the plastic barbed hooks as well.

Offline Lamar

  • Lunker
  • *****
  • Posts: 2864
Re: EWG or Round Bend
« Reply #2 on: 04/08/15 16:30 UTC »
  i use a EWG Gamakatsu hook for worms. Missing fish is just part of this sport. When worm fishing I always let the fish run a few seconds before setting the hook. Seems to get me better hook ups.

Offline efishnc

  • Lunker
  • *****
  • Posts: 2138
Re: EWG or Round Bend
« Reply #3 on: 04/10/15 22:57 UTC »
Worm hook???... is that something like a jig without the lead?

Offline Denny Welch

  • Lunker
  • *****
  • Posts: 2377
    • Believe Baits
Re: EWG or Round Bend
« Reply #4 on: 04/11/15 07:30 UTC »
EWG. 
Until next time.

Denny

denny@believebaits.com
www.believebaits.com

Offline bassinfool

  • Lunker
  • *****
  • Posts: 759
Re: EWG or Round Bend
« Reply #5 on: 04/13/15 08:31 UTC »
EWG all the way.  Only time I use anything else is for flipping.

Offline BareKnuckleJigs

  • Lunker
  • *****
  • Posts: 3122
  • ...the Nut behind the Bolt...
    • https://rumble.com/v10miez-world-premiere-watch-the-water.html
Re: EWG or Round Bend
« Reply #6 on: 07/16/15 23:23 UTC »
I tend to favor EWG, Gamakatsu (3/0 and 5/0 584, and a few 5/0 SkipGaps) mostly but there are a few 3/0 Trokars in there.  I do have quite a few Owner 5101 which is a Longer-shank Sproat Bend...these are good for rigging Tubes that have the Point Skin-hooked because the "Height Offset" between the Eye and Point (Point/Eye horizontal) is major which favors the thickness of a Tube.  I also like these for "traditional" Worm-rigging where the Point is buried in the Worm Body at an Angle, slightly upwards...I find a 7.5" Ribbontail likes being rigged as such.
.El Gnaw.

"Drizzle Spoon ROCKS!"  Jerry V
"Wash Your Hands"  BKJ
".DOMINATE."  BKJ

https://rumble.com/v1wac7i-world-premier-died-suddenly.html 👈😎

https://youtube.com/shorts/-I9g2VLfJAk?feature=share 👈😁🇺🇸🇺🇸

Offline greybeard

  • Minnow
  • *
  • Posts: 14
Re: EWG or Round Bend
« Reply #7 on: 08/15/16 23:05 UTC »
Round bend for almost everything as long as it isn't a real thick bait.usually 4/0 for most everything.

Offline Fatman

  • Lunker
  • *****
  • Posts: 1473
Re: EWG or Round Bend
« Reply #8 on: 08/16/16 13:59 UTC »
Have to say round bend as all the worm hooks I have are the 45 Automatic Eagle Claw worm hooks

Offline Mike J

  • Lunker
  • *****
  • Posts: 1618
Re: EWG or Round Bend
« Reply #9 on: 08/16/16 17:03 UTC »
Worm hook???... is that something like a jig without the lead?
I think it's something for bass . I don't know I prefer fish with teeth lol ;D

Offline kevin

  • Kicker
  • ****
  • Posts: 292
Re: EWG or Round Bend
« Reply #10 on: 08/17/16 15:10 UTC »
straight shank unless i am fishin thicker bodied baits than the ewg hooks. I use alot of gammies  for soft plastic baits.Seems like the straight shank hooks come through grass better than the ewg hooks also.

Offline DobynsTriton

  • Lunker
  • *****
  • Posts: 1507
  • KLK Plastics
Re: EWG or Round Bend
« Reply #11 on: 08/30/16 21:38 UTC »
round bend 4/0-5/0 with coil keeper with encased alignment pin always for worms unless its something near the diameter of a senko. better hookups & wont grab weeds or grass
KLK

Offline WALLEYE WACKER

  • Lunker
  • *****
  • Posts: 4494
    • WALLEYE WACKER
Re: EWG or Round Bend
« Reply #12 on: 08/31/16 09:32 UTC »
Round bend worm hook on worms and EWG on thicker bait's like swim bait's and tubes.
May your days be filled with sun shine and you always have a tight line. AMEN