Author Topic: Green pumpkin question  (Read 3254 times)

Offline Rwall89

  • Yearling
  • **
  • Posts: 40
Green pumpkin question
« on: 01/16/17 15:29 UTC »
I've looked through several threads to find this answer but can't find it. I have a customer that wants green pumpkin worms with no flake. Is it possible to make green pumpkin by mixing green watermelon and motor oil? And if so, whatvratio? Think I'll be using 1 cup plastic

Offline ctom

  • Lunker
  • *****
  • Posts: 11412
Re: Green pumpkin question
« Reply #1 on: 01/16/17 15:36 UTC »
That's a tough question to answer since there are so many vendors for colorants and each one is a little different from the others. You'll be steps ahead by ordering your green pumpkin colorant to start.
There are good ships
and wood ships
ships that sail the sea
but the best ships are friendships
and may they
always be ......An Irish Toast

Offline Rwall89

  • Yearling
  • **
  • Posts: 40
Re: Green pumpkin question
« Reply #2 on: 01/16/17 15:42 UTC »
I will eventually order it. Probably putting an order in within a week or two. They are both essential series colorant. This is the first person who has asked for me to make them a worm. Also, since you are pretty experienced in this stuff, my chartreuse has a hard powder at the bottom and light yellow fluid in the top of the bottle like its old and separated. Have you ever had this happen? And is there something I can do to fix it? I've tried shaking it to death but the powder is too solid.

Offline Bob

  • Kicker
  • ****
  • Posts: 147
Re: Green pumpkin question
« Reply #3 on: 01/16/17 16:28 UTC »
If you need a green pumpkin and all you have is watermelon then mix a good watermelon and add a drop of RED at a time until you get the colour you need.

 ;)

Offline DF

  • Lunker
  • *****
  • Posts: 1470
Re: Green pumpkin question
« Reply #4 on: 01/16/17 16:42 UTC »
my chartreuse has a hard powder at the bottom and light yellow fluid in the top of the bottle like its old and separated. Have you ever had this happen? And is there something I can do to fix it? I've tried shaking it to death but the powder is too solid.

http://custombaits.com/index.php?topic=6612.msg49151#msg49151