need a few samples of the shad head jig rig mold

[kris brantner]

Looking to buy like a half doz poured but not pained heads feom this mold. Would like to see if I can generate some interest before I buy the mold. Let me know if ya can help me out. Thanks

[toadfrogbaits]

you talking the wedge shaped and what weight .

[kris brantner]

Yeah like the a rig heads. I think there are 3 cavities ide take two in each size with a round bend 5/0 hook

[smalljaw]

You are looking at the shad head rig jig with wire keeper, is that correct? Which sizes and the mold calls for a 3/0 and a 4/0 hook so I'm not sure a 5/0 will work but I haven't tried one as I have the mold.

[kris brantner]

You can usually go a hook size or two bigger than the mold suggests.  But yes this is the mold im looking for. Two in each cavity is what I would be needing.

[smalljaw]

I got samples of the 5/0 hook and it is a no go, I can put the 4/0 in the first 3 cavities listed for 3/0 but a 5/0 doesn't work.

[kris brantner]

Ight. 4/0 It is. Pour me some up if ya would and let me know how much I owe ya

[smalljaw]

Which cavities? there are 6 cavities starting with 1/8oz and each one after is 1/16oz bigger up to 7/16oz.

[kris brantner]

How about 1 in each cavity with the biggest hooks you can fit in each one