« previous next »
Pages: 1 2 3 [4] 5 6

Author Topic: Jig Making  (Read 27681 times)

Offline kipbass

  • Lunker
  • *****
  • Posts: 871
Re: Jig Making
« Reply #45 on: 09/26/12 18:09 UTC »
Barlows offers about 5 different types of gate cutters. Any suggestions? http://www.barlowstackle.com/Gate-Cutters-C138.aspx
Currently working with 3/4oz football head jig, Model FBB-3H-AF.
Logged

Offline Denny Welch

  • Lunker
  • *****
  • Posts: 2377
    • Believe Baits
Re: Jig Making
« Reply #46 on: 09/26/12 19:19 UTC »
The 3/4 oz head is pretty heavy so I'd probably go with the 5 3/4" cutter.  Before doing that, why don't you try the snapping off of the sprue like Tom suggested or the twisting off like I mentioned.  It takes a little longer, but you'll save a lot of time filing / sanding.
Logged
Until next time.

Denny

denny@believebaits.com
www.believebaits.com

Offline Justin9j

  • Lunker
  • *****
  • Posts: 1647
Jig Making
« Reply #47 on: 09/26/12 20:23 UTC »
Kip one thing you can try is smoking the mold. Take a candle light it. Let it burn for just a min. Then blow it out. Take the mold and smoke the cavities. The cavities will turn little black.  My grandpa does that anytime one acts funny.  It does help. 
Logged

Offline pjmcla

  • Lunker
  • *****
  • Posts: 1721
Re: Jig Making
« Reply #48 on: 09/26/12 20:32 UTC »
Find a heavy set of pliers that doesn't have serrations on the jaws ( or grind / file the serrations off ) and hold the jig head with them and use a heavy pair of pliers to snap the sprues off.  If you use the hook at all you will loosen the head.  I use an older 5" long wide style flat nose to hold the head and a 7" bent nose to bend / snap the sprue off.    Just be extra careful when pouring;  Molton lead is much less forgiving than 350 degree plastic.
Logged

Offline kipbass

  • Lunker
  • *****
  • Posts: 871
Re: Jig Making
« Reply #49 on: 09/27/12 05:39 UTC »
Quote from: Denny Welch on 09/26/12 19:19 UTC
The 3/4 oz head is pretty heavy so I'd probably go with the 5 3/4" cutter.  Before doing that, why don't you try the snapping off of the sprue like Tom suggested or the twisting off like I mentioned.  It takes a little longer, but you'll save a lot of time filing / sanding.
Might be easier to snap off once I start using the softer lead.
Logged

Offline ctom

  • Lunker
  • *****
  • Posts: 11413
Re: Jig Making
« Reply #50 on: 09/27/12 11:38 UTC »
Quote from: kipbass on 09/27/12 05:39 UTC
Might be easier to snap off once I start using the softer lead.

The alloys are actually more brittle and snap off easier than pure lead. Pure lead will need to be flexed a couple times to snap/twist the sprues off. Snapping/twising leaves little evidence that a sprue was there.
Logged
There are good ships
and wood ships
ships that sail the sea
but the best ships are friendships
and may they
always be ......An Irish Toast

Offline kipbass

  • Lunker
  • *****
  • Posts: 871
Re: Jig Making
« Reply #51 on: 09/27/12 17:05 UTC »
Quote from: ctom on 09/26/12 15:10 UTC
Some day I'll tell ya'll about the two pigs. And then there's the Thanksgiving morning deer. Both of these took place in my yard/driveway and I live in a city of 100,000 +.
Don't make us wait too long! I'm enjoying this and sharing the stories with my wife. She doesn't believe Mr Denny is a lawyer!
Logged

Offline Justin9j

  • Lunker
  • *****
  • Posts: 1647
Jig Making
« Reply #52 on: 09/27/12 18:37 UTC »
. She doesn't believe Mr Denny is a lawyer!


I'm not sure I do either. 

Ha ha.
Logged

Offline Denny Welch

  • Lunker
  • *****
  • Posts: 2377
    • Believe Baits
Re: Jig Making
« Reply #53 on: 09/27/12 18:51 UTC »
Most of my clients probably feel the same way, too.
Logged
Until next time.

Denny

denny@believebaits.com
www.believebaits.com

Offline Jason

  • Global Moderator
  • Lunker
  • *****
  • Posts: 2304
  • Tight Lines!
Re: Jig Making
« Reply #54 on: 09/28/12 08:56 UTC »
Quote from: Denny Welch on 09/27/12 18:51 UTC
Most of my clients probably feel the same way, too.

 ;D  Funny!
Logged

Offline kipbass

  • Lunker
  • *****
  • Posts: 871
Re: Jig Making
« Reply #55 on: 09/28/12 10:15 UTC »
The bad thing is,I think we all suffer from a short attention span, ADD.
What was supposed to be an informative, learning tool quickly turned into a laugh fest. :P
I of course wouldn't have it any other way!
Logged

Offline kipbass

  • Lunker
  • *****
  • Posts: 871
Re: Jig Making
« Reply #56 on: 10/02/12 07:16 UTC »
First thing is THANKS TO ALL WHO GAVE ADVICE! I'll try and post a pix later today. I bought some black silicone skirts, blue, and a  greenish crawfish color. For the paint I bought Boss army green pumpkin. The paint looks good with the craw skirt, not so good with the others. I'm thinking about black and white paint. Can anyone suggest a few more standard colors that work well with a variety of skirts?
Logged

Offline Justin9j

  • Lunker
  • *****
  • Posts: 1647
Jig Making
« Reply #57 on: 10/02/12 10:26 UTC »
Black ,green pumpkin , and white are the three I use the most.   Red is nice too. 
Logged

Offline kipbass

  • Lunker
  • *****
  • Posts: 871
Re: Jig Making
« Reply #58 on: 10/02/12 14:07 UTC »
Ok, don't laugh too hard. I know I should have sanded this one before I painted it.
Logged

Offline Billmo

  • Lunker
  • *****
  • Posts: 656
Re: Jig Making
« Reply #59 on: 10/02/12 14:23 UTC »
nice looking jig kip...   
Logged
Pages: 1 2 3 [4] 5 6
« previous next »