« previous next »
Pages: [1] 2 3 ... 5

Author Topic: El Gusano, 2/11/14  (Read 34221 times)

Offline Jerry V

  • Global Moderator
  • Lunker
  • *****
  • Posts: 1454
    • Do-It Molds
El Gusano, 2/11/14
« on: 02/11/14 14:12 UTC »
We are throwing another finesse worm into the mix.  Introducing...  EL GUSANO, 4.5" AND 6" along with laminate plates for each.  These are pretty straight forward worms designed to coax a difficult bite into happening.  The 6" has a diameter of 5/16" and the 4.5" diameter is 1/4" both tapering to the tail.  The front half of the worm is round then transitions to a flat tail section.  Perfect for drop shot or shakey head presentations these worms will boost your percentages with out a doubt. 

They are available for purchase by calling customer service directly 319-984-6055.

#95266, 4.5", 3 cavity = 99.00
#95267, 4.5" Lami Plate = 18.99
#95268, 6", 3 cavity = 129.00
#95269, 6" Lami Plate = 19.99









Logged
"What started as a hobby is now a way of life."  Justin9j

"It's a shame I have to work, cause I really don't have time for it." Shane

"A mind is a terrible thing to waste (or) losing your memory sucks."  Denny Welch

"I wonder what the fish feel like on those days when you can't buy a bite?" pjmc

Offline sim

  • Kicker
  • ****
  • Posts: 266
Re: El Gusano, 2/11/14
« Reply #1 on: 02/11/14 15:19 UTC »
Sweet! You read my mind -
Logged

Offline 1boom

  • Kicker
  • ****
  • Posts: 163
Re: El Gusano, 2/11/14
« Reply #2 on: 02/11/14 15:47 UTC »
Guess I found my next mold!  ;)
Logged
I'd rather be fishin'...

Offline biglewers

  • Lunker
  • *****
  • Posts: 561
Re: El Gusano, 2/11/14
« Reply #3 on: 02/11/14 19:07 UTC »
Can you make it in a 5 cav mold and drop the price to make it a better deal?  3 cavity for 129? Just seems a bit high.
Logged

Offline tom1441

  • Kicker
  • ****
  • Posts: 286
Re: El Gusano, 2/11/14
« Reply #4 on: 02/11/14 19:21 UTC »
Nice looking worm
Logged

Offline Justin9j

  • Lunker
  • *****
  • Posts: 1647
Re: El Gusano, 2/11/14
« Reply #5 on: 02/11/14 19:25 UTC »
Ok I have to ask. Why just three cav?  Why not five. Or even four? 
Logged

Offline Jerry V

  • Global Moderator
  • Lunker
  • *****
  • Posts: 1454
    • Do-It Molds
Re: El Gusano, 2/11/14
« Reply #6 on: 02/11/14 19:42 UTC »
Quote from: Justin9j on 02/11/14 19:25 UTC
Ok I have to ask. Why just three cav?  Why not five. Or even four? 

Cost,as always, is based on the same formula used to figure cost on any existing designs.  It centers heavily on machine time, details, and the tooling used to achieve that.

Quote from: biglewers on 02/11/14 19:07 UTC
Can you make it in a 5 cav mold and drop the price to make it a better deal?  3 cavity for 129? Just seems a bit high.

Of course we could have made it 4 or 5 cavities, but as mentioned, the price would certainly not drop by doing so.

You should really have a good look at this worm.  It's been in the works now for many months and tested, not only by us, but Elite Series Bass Anglers as well.  Their feed back has lead us to sacrifice cutting corners for an effective, quality design. 

This Dog Hunts.
Logged
"What started as a hobby is now a way of life."  Justin9j

"It's a shame I have to work, cause I really don't have time for it." Shane

"A mind is a terrible thing to waste (or) losing your memory sucks."  Denny Welch

"I wonder what the fish feel like on those days when you can't buy a bite?" pjmc

Offline jmatheny9

  • Lunker
  • *****
  • Posts: 611
Re: El Gusano, 2/11/14
« Reply #7 on: 02/11/14 20:07 UTC »
I like the taper then back to thick. Seems like it's give it lots of action


  @bullfroglures       #bullfroglures
Logged
-Jeremiah

Offline Justin9j

  • Lunker
  • *****
  • Posts: 1647
Re: El Gusano, 2/11/14
« Reply #8 on: 02/11/14 20:20 UTC »
You should send some to indiana. See if that dog really does hunt. Only five fish here. And one died this winter I think.
Logged

Offline School Master

  • Yearling
  • **
  • Posts: 45
    • http://schooly20.wix.com/schoolmastertackle
Re: El Gusano, 2/11/14
« Reply #9 on: 02/11/14 21:07 UTC »
Yup, dat nice
Logged

Offline pjmcla

  • Lunker
  • *****
  • Posts: 1721
Re: El Gusano, 2/11/14
« Reply #10 on: 02/11/14 21:12 UTC »
Jerry V  -  On the 4.5 inch version; is that 1/4th at the head or at the egg sac?   If at the sac; what is the head diameter?

Thanks
Logged

Offline Jerry V

  • Global Moderator
  • Lunker
  • *****
  • Posts: 1454
    • Do-It Molds
Re: El Gusano, 2/11/14
« Reply #11 on: 02/11/14 21:17 UTC »
It's 1/4 at the head. 
Logged
"What started as a hobby is now a way of life."  Justin9j

"It's a shame I have to work, cause I really don't have time for it." Shane

"A mind is a terrible thing to waste (or) losing your memory sucks."  Denny Welch

"I wonder what the fish feel like on those days when you can't buy a bite?" pjmc

Offline WALLEYE WACKER

  • Lunker
  • *****
  • Posts: 4494
    • WALLEYE WACKER
Re: El Gusano, 2/11/14
« Reply #12 on: 02/11/14 23:03 UTC »
 JERRY That didn't take long.  IF YOU GUYS KEEP IT UP I WILL HAVE TO FIND A BIG PLACE.

Sent from my SCH-R960 using Tapatalk

Logged
May your days be filled with sun shine and you always have a tight line. AMEN

Offline WALLEYE WACKER

  • Lunker
  • *****
  • Posts: 4494
    • WALLEYE WACKER
Re: El Gusano, 2/11/14
« Reply #13 on: 02/12/14 00:19 UTC »
Jerry am I right the worm is full round and changes to semi flat at the tail

Sent from my SCH-R960 using Tapatalk

Logged
May your days be filled with sun shine and you always have a tight line. AMEN

Offline Bugpac

  • Kicker
  • ****
  • Posts: 129
Re: El Gusano, 2/11/14
« Reply #14 on: 02/12/14 08:39 UTC »
Quote from: WALLEYE WACKER on 02/11/14 23:03 UTC
JERRY That didn't take long.  IF YOU GUYS KEEP IT UP I WILL HAVE TO FIND A BIG PLACE.

Sent from my SCH-R960 using Tapatalk
lol. And a new mortgage to pay for it.  Its amazing that it takes that much longer to machine this worm vs the stick bait.
Logged
Pages: [1] 2 3 ... 5
« previous next »