Swilrs

[Scotty]

Hello,
I was just curious if anyone knows how to do swirls with two different colors of plastic?
Not sure if this is the right place for this question but it is a start.

[1boom]

Two injectors and a blending block. Injector a little of one color then the second color and switch back and forth til the mold is full.

[Scotty]

That won't make to were you just have one color on top and one on bottom working you way until the mold is full?

[1boom]

Not if you alternate colors

[Lamar]

Here's a swirl that I made earlier. For this I used a twin injector and gave slow and even pressure while I was turning it.

[DF]

Nice Lamar

[Bucko]

Cool senkos!  Why's so much of the cool stuff done with a twin injector?!?!  Price tag on those bad boys are steep!

[Lamar]

Cool senkos!  Why's so much of the cool stuff done with a twin injector?!?!  Price tag on those bad boys are steep!

Well it's not like they ever go bad. Like many other hobbies. If your going to play you got to pay.

[1boom]

X2 bucko!

[billygee]

Here's a swirl that I made earlier. For this I used a twin injector and gave slow and even pressure while I was turning it.

"Sweet" 

May give that twist to some of my baits.   

What type of dual Injector are you using   

billygee   

[BareKnuckleJigs]

Bangin' Senkos...like Drumstick.

[Justin9j]

I bought a blending block then picked up a second injector   Works great

[Scotty]

Thank You guys a lot. I am really starting to like this forum. 

[Lamar]

Here's a swirl that I made earlier. For this I used a twin injector and gave slow and even pressure while I was turning it.

"Sweet" 

May give that twist to some of my baits.   

What type of dual Injector are you using   

billygee   ::

http://www.basstackle.com/TWINJECTOR_p/twinjector.htm

[biglewers]

Take the twin injector and blending block. Shoot one color In and then shoOt the other color. You will see the first injector rise as plastic goes back in it.  Try it a few times, you will get the hang of it.