I have the remainder of 2.5gal of caney soft. Approximately 1.5qt left, I haven't been making baits for a few months, and when I started again, I have yellowing.
I tried microwave and figured I was scorching it, so this is the process I used.
1. 4oz plastic with my color and 6 drops of heat stabilizer
2. Heat 30sec at a time and stirring in between.
3. Check temp with the thermometer that is sold here, except I got mine 3 years ago on recommendation on here.
4. Stop nuking at 340deg
5. Continue to stir and watch temp, shoot at 350deg.
6. I can see the plastic yellowing while shooting.
I haven't had this issue in the past, and I am wondering if I wasn't keeping my plastisol in suspension as I should have and I am left with additives and little plastisol. Is this possible?